Sonar acoustic facies and sediment distribution on an area of the deep ocean floor     

Robert B. Kidd  Robert W. Simm  Roger C. Searle 《Marine and Petroleum Geology》1985,2(3):210-221

Long-range sidescan sonar can be used to map sediment distributions over wide expanses of deep ocean floor. Seven acoustic facies that arise from differing sediment or rock types have been mapped over the low-relief Saharan continental rise and Madeira abyssal plain. These have been calibrated with sampling, profiling and camera studies and the facies can be traced confidently on a regional scale using the sidescan data. The mapping of the sediment distribution shows that a complex interplay of turbidity current and debris flow processes can occur at a continental rise/abysaal plain transition over 1000 km from the nearest continental slope.  相似文献   

Numerical modelling of the impact crater depth-diameter dependence in an acoustically fluidized target     

K. Wünnemann  B.A. Ivanov 《Planetary and Space Science》2003,51(13):831-845

2D numerical modelling of impact cratering has been utilized to quantify an important depth-diameter relationship for different crater morphologies, simple and complex. It is generally accepted that the final crater shape is the result of a gravity-driven collapse of the transient crater, which is formed immediately after the impact. Numerical models allow a quantification of the formation of simple craters, which are bowl-shaped depressions with a lens of rock debris inside, and complex craters, which are characterized by a structural uplift. The computation of the cratering process starts with the first contact of the impactor and the planetary surface and ends with the morphology of the final crater. Using different rheological models for the sub-crater rocks, we quantify the influence on crater mechanics. To explain the formation of complex craters in accordance to the threshold diameter between simple and complex craters, we utilize the Acoustic Fluidization model. We carried out a series of simulations over a broad parameter range with the goal to fit the observed depth/diameter relationships as well as the observed threshold diameters on the Moon, Earth and Venus.  相似文献   

论裸眼井中的“共振纵波”和“共振横波”   总被引：3，自引：0，他引：3  

唐晓明  郑传汉 《地球物理学报》1991,34(1):125-128

一、引言 文献[1]和[2]指出,充流体裸眼井中存在频率确定、波速恒定、且沿传播方向不衰减的“共振纵波”和“共振横波”。本文的目的在于论证并指出,这两种波是不存在的。 二、论证 设一点源位于z=0的井轴上,则井轴上z处的声波频率响应为  相似文献   

海拉尔盆地贝西斜坡北部地区储层特征及影响因素分析   总被引：2，自引：0，他引：2  

李占东  周件林  文华  孙娜 《岩石矿物学杂志》2008,27(1):45-51

通过测井曲线的标准化处理及信息提取、岩心及录井岩屑观察、铸体薄片、物性分析、扫描电镜、压汞分析等技术手段,研究了海拉尔盆地贝西斜坡北部地区南屯组储层的主要岩性特征、物性特征、储集空间类型和影响因素.研究结果表明.海拉尔盆地南屯组以内陆湖相碎屑岩为主,主要包括角砾岩、砾岩、砂砾岩、粗砂岩、细砂岩、粉砂岩、泥质砂岩及泥岩等.南一段储层孔隙度平均值为6.15%,渗透率平均值为0.31 × 10-3μm2,为低孔特低渗型孔隙特征;南二段储层孔隙度平均值为12.18%,渗透率平均值为2.79× 10-3μm2,属于中孔低渗型孔隙特征.储集空间类型以粒间孔隙为主,发育一定的次生孔隙.喉道分为4种类型(Ⅰ类、Ⅱ类、Ⅲ类、Ⅳ类).扇三角洲前缘分支水道砂体、扇三角洲平原辫状河道砂体和滨浅湖砂坝微相砂体为该区有利的储层砂体类型.储层性质主要受沉积相和成岩作用影响.  相似文献   

海洋沉积物声速与物理参数的关系   总被引：4，自引：0，他引：4       下载免费PDF全文

卢博  梁元博 《海洋科学》1993,17(6):54-57

海洋沉积声速与物理性质密切相关，特别是含水量Ｗ和孔隙度Ｎ，它们在建立回归议程和预报沉积物性质中有所贡献。中国东，南海沿海沉积物的资料和数据表明：声速和声速比可以用来预报沉积物性质。  相似文献   

On the recovery of surface wave by pressure transfer function     

Cheng-Han Tsai  Min-Chih Huang  Fu-Ji Young  Yin-Chern Lin  Hsien-Wen Li 《Ocean Engineering》2005,32(10):4936-1259

Except the commonly selected pressure transfer function derived from the linear wave theory, a previous study on the pressure transfer function for recovering surface wave from underwater pressure transducer suggested that the pressure transfer function is a function of frequency parameter only. With careful analysis, this study showed that the pressure transfer function should include a transducer submergence parameter as that given by the linear theory. It was found that the previously suggested empirical formula should be restricted to measurements with the pressure transducer close to the surface; otherwise overestimation of wave height would result. Field measurements were carried out with an acoustic wave gauge and a synchronized pressure transducer located at various depths with submergence parameter close to 1 (near the sea floor). It was shown that the previous one-parameter empirical formula might overestimate the significant wave height by more than 30%. This study found that with deep-water wave bursts excluded, the transfer function based on the linear wave theory provided a fairly good estimation on the significant wave heights, with an average deviation of 3.6%.  相似文献   

大深度触底指示器Pinger换能器及其声反射系统     

王清池  许肖梅  许鹭芬  黄锡明 《海洋科学》1997,21(6):61-63

  相似文献   

Monitoring the Kuroshio Extension with Dynamically Constrained Synthesis of the Acoustic Tomography, Satellite Altimeter and in situ Data     

Konstantin V. Lebedev  Max Yaremchuk  Humio Mitsudera  Iwao Nakano  Gang Yuan 《Journal of Oceanography》2003,59(6):751-763

A finite-difference quasigeostrophic (QG) model of an open ocean region has been employed to produce a dynamically constrained synthesis of acoustic tomography and satellite altimetry data with in situ observations. The assimilation algorithm is based upon the 4D variational data interpolation scheme controlled by the model's initial and boundary conditions. The data sets analyzed include direct and differential travel times measured at the array of five acoustic transceivers deployed by JAMSTEC in the region of the Kuroshio Extension in 1997, Topex/Poseidon altimetry, CTD soundings, and ADCP velocity profiles. The region monitored is located within the area 27.5°–36.5°N, 143°–155°. The results of assimilation show that mesoscale variability can be effectively reconstructed by five transceivers measuring direct and reciprocal travel times supported by relatively sparse in situ measurements. The misfits between model and data lie within the observational error bars for all the data types used in assimilation. We have compared the results of assimilation with the statistical inversion of travel time data and analyzed energy balances of the optimized model solution. Energy exchange between the depth-averaged and shear components of the observed currents reveals a weak decay of the barotropic mode at the rate of 0.2 ± 0.7⋅10⁻⁵ cm²/s³ due to topographic interaction. Mean currents in the region are unstable with an estimate of the available potential energy flux from the mean current to the eddies of 4.7 ± 2.3⋅10⁻⁵ cm²/s³. Kinetic energy transition has the same sign and is estimated as 2.8 ± 2.5⋅10⁻⁵ cm²/s³. Potential enstrophy is transferred to the mesoscale at a rate of 5.5 ± 2.7⋅10⁻¹⁸ s⁻³. These figures provide observational evidence of the properties of free geostrophic turbulence which were predicted by theory and observed in numerical experiments. This revised version was published online in July 2006 with corrections to the Cover Date.  相似文献   

Remote estimation of surficial seafloor properties through the application Angular Range Analysis to multibeam sonar data   总被引：2，自引：2，他引：2  

Luciano Fonseca  Larry Mayer 《Marine Geophysical Researches》2007,28(2):119-126

The variation of the backscatter strength with the angle of incidence is an intrinsic property of the seafloor, which can be used in methods for acoustic seafloor characterization. Although multibeam sonars acquire backscatter over a wide range of incidence angles, the angular information is normally neglected during standard backscatter processing and mosaicking. An approach called Angular Range Analysis has been developed to preserve the backscatter angular information, and use it for remote estimation of seafloor properties. Angular Range Analysis starts with the beam-by-beam time-series of acoustic backscatter provided by the multibeam sonar and then corrects the backscatter for seafloor slope, beam pattern, time varying and angle varying gains, and area of insonification. Subsequently a series of parameters are calculated from the stacking of consecutive time series over a spatial scale that approximates half of the swath width. Based on these calculated parameters and the inversion of an acoustic backscatter model, we estimate the acoustic impedance and the roughness of the insonified area on the seafloor. In the process of this inversion, the behavior of the model parameters is constrained by established inter-property relationships. The approach has been tested using a 300 kHz Simrad EM3000 multibeam sonar in Little Bay, NH. Impedance estimates are compared to in situ measurements of sound speed. The comparison shows a very good correlation, indicating the potential of this approach for robust seafloor characterization.  相似文献   

Twelve years of tracking 52-Hz whale calls from a unique source in the North Pacific     

William A. Watkins  Mary Ann Daher  Joseph E. George  David Rodriguez 《Deep Sea Research Part I: Oceanographic Research Papers》2004,51(12):1889-1901

A unique whale call with 50–52 Hz emphasis from a single source has been tracked over 12 years in the central and eastern North Pacific. These calls, referred to as 52-Hz calls, were monitored and analyzed from acoustic data recorded by hydrophones of the US Navy Sound Surveillance System (SOSUS) and other arrays. The calls were noticed first in 1989, and have been detected and tracked since 1992. No other calls with similar characteristics have been identified in the acoustic data from any hydrophone system in the North Pacific basin. Only one series of these 52-Hz calls has been recorded at a time, with no call overlap, suggesting that a single whale produced the calls. The calls were recorded from August to February with most in December and January. The species producing these calls is unknown. The tracks of the 52-Hz whale were different each year, and varied in length from 708 to 11,062 km with travel speeds ranging from 0.7 to 3.8 km/h. Tracks included (A) meandering over short ranges, (B) predominantly west-to-east movement, and (C) mostly north-to-south travel. These tracks consistently appeared to be unrelated to the presence or movement of other whale species (blue, fin and humpback) monitored year-round with the same hydrophones.  相似文献